This article contains affiliate links: if you buy through them we may earn a commission, at no extra cost to you. Read our affiliate disclosure.
At the heat box, a steward looks over the skater in front: helmet on, gloves on, neck covered, shin and knee pads in place. If something is missing or does not comply, that skater does not start (ISU Rule 288 and Rule 294). Short track gear is more than skates. It is a set of required protective items that together are meant to reduce cuts and head injuries in a sport where blades pass inches from skin. This page explains what each piece does, what the standards say, how to check fit and condition, and where makers’ claims end.
Quick answer: A short track skater needs fixed-blade skates, a helmet to the ASTM short track standard or an ISU-approved one, cut-resistant clothing, gloves, neck protection and ankle protection, shin and padded knee protection, and eye protection. Required cut levels depend on the event, so check your club and meet rules before you buy. Standards matter more than marketing: the ISU itself says no equipment can assure full protection. Products below come from retail listings, not our testing.
General information, not medical advice. The gear rules are covered with their reasons in our injury prevention page, and the sport is introduced on the short track speed skating hub. The parent sport is on the speed skating hub.
What the rules require
ISU Rule 288 (2026) says that in ISU events and the Olympics all skaters must wear, and in other international competitions should wear:
- a helmet in compliance with the current ASTM standard, or another standard approved by the ISU for short track, of regular shape with no protrusions;
- cut-resistant gloves or mitts (predominantly white at ISU events and the Olympics);
- shin protection and padded or padded hard-shell knee protection;
- long-sleeved, long-legged clothing as set out in the current ISU communication;
- cut-resistant neck protection that fully covers the neck, and approved eye protection at ISU events;
- skates with closed tubes, blade ends rounded with a radius of at least 10 mm, and blades fixed to the boot at at least two points with no moveable parts.
Rule 288 also says each skater is solely responsible for ensuring personal equipment meets the highest safety criteria. The heat box steward decides whether a skater has respected the safety conditions, and a skater whose gear does not comply is excluded (recorded as Did Not Start).
Standards versus maker claims
The ISU’s protection communication (No. 2636, May 2024) names the standards. Cut resistance is based on EN 388, with levels 2 to 5. It requires a level 3 suit at the Olympics and ISU events, and level 2 (with level 3 highly recommended) for senior and junior A and B international competitions. Gloves should be at least EN 388 cut level 3, with levels 4 and 5 recommended, and the neck guard goes under the suit so a blade cannot slide beneath it. Helmets follow ASTM F1849, and eyewear must meet ANSI Z87.1 or ASTM F803. US Speedskating’s 2026-27 short track rules set levels by event: selection competitions need a level 3 suit and level 3 gloves, Age Group Nationals need level 2 with level 3 highly recommended, and regional or club racing highly recommends level 2. The ISU says protection cannot absolutely assure full safety.
A maker’s words such as “tested,” “cut-proof” or “level 4” are claims until the label names the standard and level and it matches your event’s requirement. Examples we saw while researching: one US short track maker says its helmet meets short track safety standards and describes its gloves as level 4 cut resistance, and one European maker says its helmet is ASTM F-1849-07 approved and complies with ISU short track regulations. We did not test any of it, and we could not confirm whether a maker’s “level 4” uses the same scale as the US Speedskating “level 3” requirement. Check the rulebook and ask your club.
Skates
Short track skates have fixed blades (US Speedskating notes short track does not use clap blades). The blade rules above are what a referee will look at. Boot fit is personal. Many boots are heat-moldable, and makers describe fitting guidance on their sites, but we found no independent study of fit and injury, so a club coach or a specialist retailer is the best place to start. Blades need sharpening by someone who knows short track, and US Speedskating lists retailers on its Speedskating 101 page. For beginners, many clubs loan skates, so ask before buying.
Helmets, neck, gloves and ankles
- Helmet: choose the standard your event names (ASTM or an ISU-approved model). A 2014 lab study found speed skating helmets nearly eliminated skull fractures but rotational acceleration values were close to the high end of concussion probability (Karton and colleagues), and a 2024 scoping review noted two studies in which short track helmets performed poorly compared with those in other sports. A helmet helps; it does not make a skater concussion-proof.
- Neck protection: must fully cover the neck and sit under the suit collar. Hockey neck guards are made to hockey standards, so confirm they satisfy your event’s coverage rule.
- Gloves: cut-resistant at the level your event requires, snug but not restrictive.
- Ankle and lower leg: the ISU says cut-resistant ankle protection shall be used, and ankles and the front of the knees are among its listed risk areas.
Fit and inspection checklist
This is general practice, not a standard. Before every session, check that the helmet sits level and snug and the strap is firm; look for cracks, dents or damage, and replace a helmet that has taken a hard impact or follow the maker’s guidance. Check that the suit, gloves and ankle protection have no holes, tears or worn thin spots, since cut protection only works if it is intact. Check that blade tubes are closed, blade ends are rounded and screws or bolts are tight. Replace anything damaged. Many coaches also carry spare gear to meets.
Examples from retail listings
Details below come from the sellers’ listings, not from our testing, and we did not find an Amazon listing for a cut-resistant skinsuit with a verified cut level, so no suit is shown. The LAND helmet is listed as tested to ASTM F1849-23 and F1446-20, but it is not on the ISU’s recognized helmet list in Communication 2636, so treat it as a club or training option and check your event. The neck guard and socks are hockey products; confirm they meet your event’s requirement. The slide board is for off-ice training (see our training page).

LAND Glacier Youth Short Track Helmet
- Listing: tested to ASTM F1849-23 and F1446-20
- EPS liner, adjustable fit
- Not on the ISU list in Comm 2636: check your event

Bauer NLP21 Cut Resistant Neck Guard
- Cut-resistant hockey neck guard
- Youth and senior sizes
- Check your event's neck coverage rule

TronX Cut-Resistant Hockey Socks
- Listing title says Level 4; no standard named
- Knee-high hockey sock
- Not a verified ISU or USS level
$24.99 at Amazon, as of Nov 17, 2026 02:07 UTC
Check price on Amazon
SPRI Slide Board
- 71 x 20 in, 4 lb
- Booties and bag included
- Lateral leg work
$45.28 at Amazon, as of Nov 17, 2026 02:07 UTC
Check price on AmazonRelated reading: long track speed skating uses different gear (clap skates and a skinsuit), and our ice hockey hub and figure skating hub cover other sports on the ice.
Short track gear FAQs
What gear is mandatory for short track?
At ISU events: an ASTM-compliant or ISU-approved helmet, cut-resistant gloves, shin and padded knee protection, long sleeves and legs, cut-resistant neck protection, eye protection and compliant skates. Below that level, your club and meet rules decide.
What cut level do I need?
It depends on the event. The ISU requires level 3 suits at the Olympics and ISU events, and US Speedskating sets level 3 for selection competitions and level 2 for Age Group Nationals. Check your own meet’s rules.
Can I use hockey neck guards and socks?
Maybe. Hockey products are made to hockey standards, and the rules require specific coverage and levels for short track. Confirm with your club or event before relying on them.
Do helmets prevent concussions?
They help prevent skull fractures but do not eliminate concussion risk, according to a 2014 laboratory study. The CDC advises removing a skater with suspected concussion and having a healthcare provider decide on return.
Do I need to buy skates to start?
Not always. US Speedskating says many clubs loan skates for practice. Ask the club before buying.
Sources
- ISU Short Track Sport Rules 2026: Rules 288 and 294
- ISU Communication No. 2636, Protection equipment in Speed Skating and Short Track Speed Skating (May 2024)
- US Speedskating Short Track Rules and Regulations 2026-27, section J
- US Speedskating, Speedskating 101 (equipment retailers)
- US Speedskating, Get Started (club loan skates)
- Karton et al., speed skating helmet performance, Br J Sports Med 2014
- Hendricks et al., injuries in competitive ice speed skating: scoping review, 2024
- CDC HEADS UP, signs and symptoms
- Amazon listing: LAND Glacier Youth Short Track Helmet
- Amazon listing: Bauer NLP21 Cut Resistant Neck Guard
- Amazon listing: TronX Cut-Resistant Hockey Socks
- Amazon listing: SPRI Slide Board
General information for education only, not medical advice. It does not replace a visit with a sports medicine doctor, physical therapist or athletic trainer. See how we write and check our pages in our editorial policy.
