This article contains affiliate links: if you buy through them we may earn a commission, at no extra cost to you. Read our affiliate disclosure.
Gear day at the shop is where a lot of freestyle skiers learn what matters. Shiny skis catch the eye, but the staff keep steering the conversation back to a helmet that fits, boots that hold the foot and goggles that work in flat light. Freestyle skiing gear depends on the event: moguls, aerials, ski cross, and the park and pipe events each use slightly different skis and setups, but protection and fit are shared. This page explains what matters, what standards say and what is only a maker’s claim. For the sport itself, see our rules and getting started page and the freestyle skiing hub.
Quick answer: Spend first on a snow-sports helmet that fits and carries a recognised standard (ASTM F2040 or EN 1077 on the label), boots that fit and bindings set and tested by a ski shop, and goggles suited to the light. Back protectors are not proven to prevent spinal injuries. Skis, poles and clothing depend on the event. Maker claims such as MIPS are the maker’s, not a standard. Ask a ski shop or coach if you are unsure.
Our top picks
These are examples of products that fit what the page describes. Check the label and size on any helmet before you ride.

Smith Mission MIPS Snow Helmet
- Listing states ASTM F2040 and EN 1077
- MIPS liner (maker claim)
- Dial fit, adjustable vents

Smith Glide Jr. MIPS Youth Helmet
- Listing states ASTM F2040 and EN 1077
- MIPS liner (maker claim)
- Dial fit

Smith Squad Goggles (ChromaPop)
- Cylindrical lens
- Anti-fog coating
- Pairs with Smith helmets
$107.93 at Amazon, as of Nov 17, 2026 01:07 UTC
Check price on Amazon
Darn Tough Solstice OTC Lightweight Ski Sock
- Over the calf, lightweight
- Knit in Vermont
- Brand guarantee per listing
Helmets: standards first
A meta-analysis in the Canadian Medical Association Journal (Russell and colleagues, 2010) found helmet users had about 35% lower odds of head injury with no rise in neck injuries. ASTM F2040 is the US standard for recreational snow-sports helmets, and EN 1077 is the European one. ASTM says protection is limited and mainly at slower speeds, and the NSAA advises wearing a helmet but skiing as if you are not. Snow Australia’s helmet page, which cites the FIS competition rules, says helmets are compulsory at events and lists EN 1077 class B or ASTM F2040 as the minimum standards; check the current FIS rules for your event. The retailer evo advises replacing a helmet after an impact. General fit advice: it should sit level, with the strap snug and no big gap against your goggles. Other terms are marketing: the Smith Mission and Glide Jr. listings state ASTM F2040 and EN 1077 and also describe MIPS, a rotational-impact liner that is the maker’s feature, and we could not verify independent test results for any helmet.
Boots, bindings and skis
Bindings and boots are a system. AAOS (the American Academy of Orthopaedic Surgeons) says a ski shop should set and test bindings for your height, weight, ability and boot size. Boots should fit snugly, with no heel lift. FIS Moguls 101 describes moguls equipment as skis 160 to 175 centimetres long, about 60 to 66 millimetres under the foot, with a small sidecut and stiff flex, short poles, standard alpine freestyle bindings and alpine-style boots, with loose clothing and coloured knee patches that help judges see leg position. For aerials, FIS gives skis of 150 to 160 centimetres and about 65 millimetres at the waist. Park and pipe skiers generally use twin-tip skis, which turn up at both ends (general knowledge; we could not source a standard). Ski cross races use their own equipment rules, and FIS publishes equipment specifications for freestyle, freeski and ski cross.
Goggles and eye protection
Goggles protect the eyes from wind, cold and glare, and lens choice matters for judging take-offs in flat light. The retailer evo suggests matching lens tint to light conditions;. Check that the goggles fit the helmet with no gap, and carry a clear or low-light lens for flat days.
Back protectors and padding
Some skiers wear back protectors or padded shorts in the park. A 2025 hospital study of alpine winter-sports patients (Tinner and colleagues) found back protectors did not significantly reduce spinal injuries, so protectors are not a proven safeguard. We found no published standard for freestyle-specific protectors in our sources. If you wear one, make sure it does not restrict motion and does not make you feel safe enough to try tricks you are not ready for.
Clothing, gloves and socks
The CDC advises dressing in layers for cold weather, and AAP lists fingers, toes, ears and noses as the first places for frostbite. Choose a moisture-wicking base layer, insulation and a waterproof shell, warm gloves and a lightweight over-the-calf sock that does not bunch in the boot. The Darn Tough sock shown above is an example; the brand guarantee is the maker’s claim from the listing. Competition rules can govern clothing and bibs, so check your event’s rules.
Inspection and care
- Before each day: check helmet straps and shell for cracks, goggles for scratches, and bindings for dirt or ice.
- After a hard fall: replace the helmet if it took an impact, and have a shop check bindings.
- Each season: have a shop service skis and test bindings.
- At home: dry boots and gloves, away from direct high heat (general advice).
How to choose
- Fit and standard first: helmet and boots.
- Get a shop to set the bindings.
- Buy skis for your main event and level, not the pros’ setup.
- Keep expectations realistic: no gear removes risk.
Next: the injury prevention page and the recovery page.
Freestyle skiing gear FAQs
What helmet standard should I look for?
ASTM F2040 or EN 1077 on the label. ASTM notes protection is limited, mainly at lower speeds.
Do I need a back protector for the park?
There is no proof that they prevent spinal injury; a 2025 hospital study found no significant reduction. It is a personal decision; talk to a coach.
What length skis do moguls skiers use?
FIS Moguls 101 describes skis of 160 to 175 centimetres, about 60 to 66 millimetres under the foot.
What is MIPS?
A rotational-impact liner some helmet makers add. It is a manufacturer feature, not a separate safety standard.
How often should I replace a helmet?
Replace it after any significant impact (evo fit guide), and check the maker’s guidance on its age.
Sources
- Russell et al. 2010, helmets and head injury (CMAJ)
- ASTM F2040
- NSAA, helmet safety
- Snow Australia, helmet rules
- FIS, Moguls 101 (equipment)
- FIS, Aerials 101 (equipment)
- FIS equipment specifications for snowboard, freestyle, freeski and ski cross (2026/27)
- Tinner et al. 2025, back protectors and spinal injuries
- AAOS OrthoInfo, skiing injury prevention
- evo, helmet size and fit
- evo, goggles guide
- CDC, winter weather prevention
- AAP HealthyChildren, winter safety
- Amazon listing, Smith Mission MIPS (maker claims)
- Amazon listing, Smith Glide Jr. MIPS (maker claims)
General information for education only, not medical advice. It cannot replace a sports medicine doctor, physical therapist or athletic trainer who knows you. Read how we work in our editorial policy.
